How to Set Up SmartThings with ULTRALOQ?

Here are the instructions about setting up SmartThings with your ULTRALOQ; please watch the video before setting it up.

How to set up?

1. Please make sure you have already registered in the Xthings Home(Formerly U home) APP and added the ULTRALOQ Smart Lock to your account. If you don't know how to register, please read the ULTRALOQ Products App Mode Programming Guide

2. Please make sure you have already registered for the SmartThings app.

3. Please make sure your lock has been set up with ULTRALOQ Bridge. For the U-Bolt Pro WiFi series and Latch 5 Series models, please make sure your lock is connected to your home WiFi already. If you don't know how to set it up, please check the following instructions.

Setting Up ULTRALOQ Bridge

Setting Up WiFi Connection for U-Bolt WiFi / U-Bolt Pro WiFi/ Latch 5 Series

U-Bolt Pro Z-Wave series models can connect SmartThings with Z-Wave; please check the setup instructions.

How to connect U-Bolt Z-Wave and U-Bolt Pro Z-Wave with SmartThings?

Step 1. Open your SmartThings App and choose the devices tab page. You will see a “+” button on the top right corner, click it.

After that, please search the Xthings Home(Formerly U home) and choose it.

Step 2. Choose Door Locks, then choose ULTRALOQ Smart Lock with WiFi access.

Step 3. Login to your Xthings Home account in SmartThings and authorize it.

Step 4. If the page shows the setup process is successful, please click Done to quit the page.

Step 5. Now, you can control ULTRALOQ Smart Lock by touching the circle.