Adding ULTRALOQ Bolt Mission to Xthings Home App

1. Confirm Bluetooth is enabled on your smartphone.
2. Make sure the Xthings Home App is up to date, then open it and log in with an Admin account (owner or shared).
3. Tap + on the upper right-hand corner.

4. Tap Add Device, then Locks and choose the corresponding model, or find the lock in Add through Scanning.

   

5. Tap Next after putting the lock into the locked position.
6. Tap Next after confirming the battery disclaimer.
7. Select the discovered device to continue pairing.

8. Find the 6-digit Program Code on the backside of the battery cover and enter it.

   

9. Create a 4-8 digit Admin Code.
10. Name the device, and Assign it to a Room.
11. Confirm your lock is in the locked position. The next couple of steps will calibrate your door orientation.
12. Choose whether you want to set up the door sensor.

You are now ready to use ULTRALOQ Bolt Mission on the Xthings Home App.